AirFit N10

Simplicity

  • Self-aligning EasyClick clips secure the frame to the headgear easily.* The AirFit™ N10 also has a simple key-clip cushion and a durable yet highly flexible integrated short tube.

Comfort

  • The soft cushion, SoftEdge™ headgear and optional soft sleeves all contribute to patient satisfaction. And diffused venting helps create a comfortable sleeping environment for the user and bed partner.

Visual freedom

  • With a compact design and a sleek frame that's positioned underneath the eyes, the AirFit N10 provides patients with unrestricted vision.

 

 

* EasyClick clips may interfere with certain implants or medical devices. Please refer to the User Guides for complete information, including clip contraindications and warnings.

 

 

  • Ensure that the gray side of the headgear that shows the ResMed and AirFit N10 logos is facing outwards.
  • Disconnect the lower straps. Line up the bottom of the cushion with the bottom of the nose.
  • Place the cushion over the nose.
  • Hold the mask against the face.
  • Pull the headgear up and over the head.
  • Bring the lower straps below the ears and attach the EasyClick clips to the outside of the frame.
  • Undo the upper fastening tabs.
  • Adjust the straps evenly until the mask sits comfortably just under the nose. Then reattach the fastening tabs so that they align with the upper straps.
TIP: The upper straps are the key adjustments for seal and comfort. Ensure that they are not over-tightened.
  • Undo the fastening tabs on the lower straps. Adjust both of the straps evenly until the mask is stable, then reattach tabs.
  • Connect the mask tubing to the air tubing attached to the device.
TIP: The lower straps require only minimal tension for the mask to fit comfortably.
  • Turn on the device so it blows air.
  • Adjust the cushion and headgear until the mask sits comfortably on the nose and is not creased or twisted.
  • The mask is now ready to use.
Note: For complete user instructions, refer to the User Guide.
Complete mask system
AirFit N10 mask system Standard 63200
Includes frame, standard cushion, standard blue headgear, soft sleeves and headgear clips
AirFit N10 mask system Wide 63202
Includes frame, wide cushion, standard blue headgear, soft sleeves and headgear clips
Headgear
Small 63262
Standard 63260
Frame system
Includes frame, cushion, soft sleeves and headgear clips. 
Small 63231
Standard 63230
Wide 63232
Cushion
Small 63241
Standard 63240
Wide 63242

Disassembly

Assembly