Mask Cleaning
Silicone masks
Oil buildup can cause accelerated wear and tear on your silicone mask, which may lead to both a deteriorated mask seal and skin irritation. We recommend cleaning your mask regularly to ensure optimum therapy.
Important to note:
- Rinse the headgear with warm water and allow to air dry out of direct sunlight before initial use
- Wash and rinse the mask cushion with pure soap and water and rinse thoroughly before initial use
- Both the mask and headgear can only be cleaned by hand washing
- The headgear may be washed without removing the headgear clips
What is an example of pure soap?
- Baby shampoo
- Neutrogena
What should I not use to clean my mask? Why?
- Aromatic-based solutions or scented oils (eg, eucalyptus or essential oils)
- Antibacterial soaps
- Detergents (even if they are mild)
- Alcohol
- Products that smell strongly (eg, soaps with citrus)
- Vinegar
We do not recommend that you use these products/solutions, as residual vapors left behind can be inhaled if not rinsed thoroughly. Antibacterial soaps, among others, may damage your mask and cause cracks, which may lead to skin irritation and poor mask performance.
Furthermore, do not iron the headgear as the material is heat-sensitive and could be damaged. For further instructions on how to clean your mask, please refer to the user guide.
UltraSoft™ memory foam mask cleaning
Keeping your ResMed UltraSoft™ memory foam cushion clean requires an entirely different kind of care. You do not need to clean the cushion every day. If any visible deterioration of the cushion is apparent, the cushion should be discarded and replaced. Learn more about replacing your mask at ResMed.com/AirTouchReminders.
Cleaning instructions
- Hand-wash the elbow, frame and headgear (not the cushion) by gently rubbing in warm (approximately 86°F/30°C) water using mild liquid detergent.
- Rinse elbow, frame and headgear well under running water and allow to air dry out of direct sunlight.
- If required, wipe the outside of the foam cushion with CPAP wipes or similar alcohol-free wipes and allow to dry.
- Keep your memory foam mask cushion dry and away from liquids.
DO NOT
The following may accelerate the wear and tear of your mask and result in compromised performance as well as skin irritation. Do not:
- Rinse or submerge in liquid
- Expose to domestic cleaning products or cleaning devices
- Store or place in direct sunlight
- Use alcohol cleaners
DAILY
- Hand-wash your mask daily with pure soap to remove all facial oils. Wash by gently rubbing in warm water (86°F / 30°C)
- No need to disassemble mask completely
- Rinse all components thoroughly with drinking quality water and allow them to air dry out of direct sunlight
- Do not soak the mask
WEEKLY
- Hand wash the headgear in warm water (86°F / 30°C) with pure soap. Rinse well and allow to air dry out of direct sunlight
DO NOT
- Wash your mask in the dishwasher
- Iron your headgear
- Use cleaning materials other than what is stated above
- Dry mask components in the sunlight
The above may accelerate the wear and tear of your mask and result in a compromised performance as well as skin irritation.